Monday, November 10, 2008

Getting Sound from a CDROM [13]

Posted by iril at 12:43 AM



In order to get sound out of the CDROM when playing CD's, we need to attach a special cable between the CDROM and motherboard/soundcard. The CDROM should come with this thin 4-pin cable with flat connectors at either end. If not, be sure to pick one up from the store.

PCSTATS

This is the analog audio cable which needs to be connected between the CD drive and your soundcard (or the motherboard if your soundcard is integrated into the board.). This allows Audio CDs to be directly played from your CD-ROM like an audio CD player. Plug the cable from the connector at the back of the CD drive to the 'audio-in' connector on your soundcard or motherboard. The soundcard connector should be fairly obvious, check your manual for the location of the one on your motherboard.

Step 9: Installing the video card

For an AGP videocard: The AGP port is the brown slot at the top of the row of peripheral (PCI) slots that runs down the board. Ensure that the catch (AGP Retention Mechanism) at the far end of the port is open, if it is present.

PCSTATS

Insert the card firmly into the AGP slot

. It should settle evenly, with just a tiny fraction of the gold traces at the bottom of the card visible. Screw the card into the expansion bracket.

For a PCI videocard: PCI ports are the white slots running in a row down the rear edge of the board. Which port you choose is fairly irrelevant, though with modern video cards, it is always a good idea to leave the slot below the one you install the card in empty to aid in ventilation of heat. Simply insert the card firmly into the slot. It should sit evenly once inserted, with only a fraction of the gold traces on the bottom of the card visible. Screw the card into the expansion bracket.

 

0 comments:

Post a Comment

Subscribe to: Post Comments (Atom)
 

blogger templates | Make Money Online